- Two-guided guided bar supports, double-balanced rapid injection.
- The high-torque hydraulic motors offer a stable plasticizing capacity, highprecision electronic device position detection enable accurate measurement.
- Multi-injection speed and pressure and multi-level holding pressure settings, switch from the injection time, location, pressure control to ensure the quality of molding.
- Multi-level back-pressure of pre-plastic and pre-speed are computer-controlled, anti- drooling and automated auto purge.
- Expected to prevent cold-start function to ensure that the screw, Liao Tong will not be harmed. Stability of the injection unit.
- Security doors fitted with hydraulic, mechanical and electrical interlocking triple safety device. When the safety door is open, the machine cannot clamp.
- Low pressure mold protection device to prevent damage to platen.
- Plywood, frame, the bridge, and the template attached structure, the finite element analysis.
- Hydraulic ejector, adjustable stroke, and top speed of ejector in and out, for multiple actions.
- Flexible tie bars nut eliminates fatigue fracture; assure the working life of tie bars - Automatic adjustment. The replacement of different mold, the parameters set by clamping force to achieve the automatic adjustment.
- High-precision electronic detection device, multi-stage control of opening stoke, speed and location, location accuracy.
| Screw diameter(mm) | 56 |
| Theoretical Shot size(cm³) | 700 |
| Shot weight (g) | 690 |
| Injection pressure(Mpa) | 178 |
| Injection rate(g/s) | 215 |
| Screw L/D ratio(L/D) | 21.6 |
| Screw speed(r.p.m) | 0-180 |
| Nozzle Diameter(Srmm) | 20 |
| Clamp tonnage (KN) | 2600 |
| Toggle stroke(mm) | 570 |
| Mould Thickness(mm) | 200-580 |
| Space between tie-bars(mm) | 580X580 |
| Ejector stroke(mm) | 160 |
| Ejector tonnage(KN) | 70 |
| Ejector number(pcs) | 9 |
| Heat power(KW) | 18.5 |
| Max. pump pressure(Mpa) | 16 |
| Valve Size(mm) | 16 |
| Machine dimension(mm) | 6300*1700*1800 |
| Machine weight(kg) | 8000 |
| Oil tank capacity(L) | 350 |
Number of mold cavities within 20g: 24Cav, output 8600pcs; Number of mold cavities within 20-30g: 16cav, output 5600pcs. The weight of the large bottle preform should not exceed 110g, the output of 110g is 1200pcs, and the number of cavities can only be 4 cavities.
Details:
